How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of steps that are unique to add an additional ignition key. It requires dealer support using the handheld computer known as Tech-2. Then, a new transponder and key have to be purchased.
Rotate your keys to stop one from deteriorating faster than the other. This will also help to keep your keys in good condition.
Replacement Case
In contrast to the traditional Saab keys of old keys, the new key fobs are equipped with electronics which makes it hard to duplicate. That has made car theft significantly more complicated than it was 20 years ago. It also makes it more expensive to replace keys lost.
Saab 9-3 owners should have two keys working. If one is lost it is expensive to add another to the car because it involves replacing the CIM module and programming the locking cylinders. Dealers usually charge between $100-$200 for this.
There are ways to reduce these costly. Some parts suppliers will use the code of an old key to cut a new metal blade for less than that of a dealer. The key, however, must be the same as the original in order to function in your car.
Follow these steps to replace the case. saab key fob G28CarKeys 'll require an open-faced screwdriver and patience. With the screwdriver slowly pry the plastic apart and then separate the emergency key from the case. Once you have the case open, remove the electronic components and put them in the new case. Make sure to insert the correct key and badge back into the case as well.
Replacement Battery
The replacement battery for the Saab 9-3 is an affordable part that can be replaced quickly and easily. This YouTube DIY video Cyclone Cyd shows how to replace the battery in the remote key fob in only four steps. This tutorial should work with any modern Saab key fob. However, the process might differ slightly.
The button is normally located next to the Saab logo on the back of the fob. It is usually located next to the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver into the tiny hole on this button. This will be enough to allow you to open the fob's case so that you can replace the battery.
After you have installed the CR1632 batteries, you can rebuild the remote key fob. You can then program it into your car. The entire process should take no more than a half hour at the most. It's a simple procedure that doesn't require any special tools.
The process can be a bit more complicated if you lose your key, but still possible. The dealer will first need to read the VIN of the vehicle before requesting an alternative TWICE module, as well as a key blade with the correct unique code. Then, they'll have to cut the replacement key and then program it using a new software tool called MDI.
Replacement Key Fob
The key fob comes with a battery that is used to lock and unlock your vehicle. They have a limited life span and eventually die. This is a frequent issue with all cars. The good thing is that you can change the batteries in most key fobs without having to replace the entire case. Amazon sells fobs for replacement that already have all the electronic components in place. It is easy to open the case and replace the batteries. It is important to remember that you'll need to take out the emergency key first. you can do this by inserting an incredibly small screwdriver with a flat head into the slot that is located in the middle of the case. Use the screwdriver to move around the case, and it should split open, making it easier to take it out.
When you're ready to replace the keys, ensure you have a spare, as this can reduce your total cost by a significant amount. If you have an additional key, you can ask the dealer to cut it and program it for your car. This is less expensive than purchasing a new key fob.
It is possible to add a second key to your car If you don't already have one, but it will require an extensive amount of research and effort. Adding a second key costs about a few hundred dollars and also requires programming of the car's computer. This can be accomplished by a professional, but it is an expensive option for the majority of owners.
Replacement Ignition
Unlike the earlier Saab automobiles, the current SAAB 9-3 models use a much more sophisticated alarm system that is built on a key code. If you lose only one key, it can be costly to purchase a new one because the car must be equipped with a specific computer and be programmed to accept a brand new key. Most locksmiths can't do this, and even dealers will charge hundred dollars to program the new key!
If you've lost the only working key, a dealer will replace your car's computer (known as the CIM or SAAB TWICE) to make an exchange, and they will charge you a premium price for it. Instead, we can reprogram the EEPROM of your current car computer to prepare it for an additional key, which will save you more than 50% of what you'll have to pay at a dealership.
If you have owned a SAAB 9-3 a long time and you're aware of the ignition keys are not very durable. They can be extremely sticky and the buttons can fall off from time to time which is why you should think about buying a new one if the one you have isn't working as it should. Luckily, replacing the ignition key isn't as complicated as it sounds and can be done quickly with the proper tools.